Introduce |
Spring Steel Sheet/strip is accessible in different specifications as per the need of our client's. We use only high quality of material such as steel and metal for manufacturing and fabricating these High Carbon Steel C80 Plates.We are also well known as Spring Steel Sheet Suppliers. C50 Cold Rolled Annealed Strip Steel Plate manufactured expressly for us to rigid quality standards for the purpose of greatest uniformity with Rockwell held to the low or medium side of range. Spring Steel 1050 Sheet Plate can be easily heat treated, hardened and tempered, formed, blanked, shaped or slightly drawn, Spring Steel used for coiled springs, flat springs, spring latches, prong lock washers, etc. C60 Spring Steel Plates mainly of high carbon steel,EN 10083 C60 steel plate is one of the higher carbon content (0.60%) steels.Spring Steel C60 Sheet is more difficult to fabricate. Spring Steel C60 Has some great features like optimum quality , perfect finish, and sturdy nature. We are involved in offering the stunning range of the EN42J Spring Steel Plates at reasonable price to their patrons. Spring Steel EN42J/C80 Sheet Plate are available at different specifications as per customer requirements. The offered C80 Spring Steel Sheet is available in Various ranges that are contrived by effectively using top-notch quality of raw material. Spring Steel Sheets Plates are having reliability, corrosion resistance, greater performance, resists compressive loading etc. We are largest Stockist EN 10083 Spring Steel Plate, 1075 Spring Steel Sheet and 1095 Spring Steel Sheet in various sizes, qualities, and grades. With the many years of experience in manufacturing Spring Steel Plate, we offer high quality, less price but the best service. Item | Spring Steel Sheet Plate/strip | Thickness | 0.1mm-800mm | Width | 5mm-4200mm | Length | 6000mm-18000mm | Material: | NVA,NVD,A,A32,,A36,AH32,AH36,B,16MnL | Q235,Q235B | EH32,EH36 | CCS-A,CCS-B,CCSA,CCSB,CCS,CCSD,CCSE | D32,D36,DH32,DH36, | GL-B,GL-D,GL-E, | E32,E36 ,ST37-2,ST52-3,A516-Gr.55/Gr60/Gr65,Gr70,A204,A378-Gr.2/Gr.12/Gr22,13CrMo44,10CrMo910,15Mo3,A515 Cr.60/Cr55/Cr65,4140,4 | Application | Construction, Automobile Industry, Pharmaceutical / Chemical Industry, Oil & Gas Industry | Hardness | Fully annealed material with a maximum hardness of 200 VPN & special temper material with hardness ranging from 230 VPN to 270 VPN. | Delivery condition | Hot rolled, controlled rolled, or normalized | Cutting service | Large steel plate cut to flat plate sizes, or cut to any size by drawing | Deep processing | After cutting large plate into the general sizes by drawing, milling and grinding, and make angles, polishing, and make special parts | Tolerance | ≤1% | MOQ | 1 Tons | Package | Standard export package, or as required. | Price term | FOB, CIF, CFR, CNF, Ex-work | Payment | T/T, L/C, Western Union, etc. | Delivery time | Within 7-15 workdays after receiving deposit or L/C | Container size | 20ft GP: 5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM | 40ft GP: 12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM | 40ft HC: 12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM |
C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc. | ronorm | Germany | UK | USA | | | | | | EN 10132-4 | DIN 17222 | BS 1449 | SAE J403 | %C | %Mn | %Si | %S | %P | C50E | CK 50 | CS50 | SAE1050 | .45-.55 | .50-.90 | .05-.35 | .040 max | .045 max | C67S | CK67/C67 | CS70 | SAE 1070 | .68 - .73 | .60 - .85 | .15 - .25 | .01 max | .02 max | C75S | CK75/C75 | CS70 | SAE 1074 | .70 - .75 | .60 - .80 | .15 - .30 | .025 max | .025 max | C85S | CK85 | CS80 | SAE 1085 | .80 - .90 | .40 - .70 | .15 - .35 | .025 max | .025 max |
Spring Steel Mechanical Properties | | Density | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | C55 | 7.85 g/cm3 | MPa -380 | MPa - 210 | 25% | C80 | 7.86 g/cm3 | 640N/mm2 max | 290N/mm2 min | 25% | 50CR4 | 7.8 g/cm3 | 1350-1650 Mpa | 1200 Mpa | 6% |
Carbon steel spring sheets - C75S / 1.1248, C85S / 1.1269 +QT / +LC | High-carbon spring sheets at the expense of corrosion resistance obtain much higher hardness, mechanical properties and are characterized by high resistance to abrasion. The sheets supplied by us have a finished, polished surface and cut edges. Most of C75S and C85S sheets are delivered in a three-variant condition. C75S materials are used for low-loaded springs, washers, feeler, shims or measuring tools. The supplied +QT materials do not require additional heat treatment after details production. | Thickness | width 300-600mm | Rm: 1300-1500 | Rm: 1500-1700 | Rm: >1700 | 0.10mm | x | - | x | 0.15mm | - | x | - | 0.20mm | - | x | x | 0.25mm | - | x | x | 0.30mm | - | x | - | 0.40mm | - | x | x | 0.50mm | x | x | x | 0.60mm | x | x | x | 0.70mm | x | x | - | 0.75mm | - | - | - | 0.80mm | x | x | - | 0.90mm | x | x | - | 1.00mm | x | x | x | 1.20mm | x | x | - | 1.25mm | x | - | - | 1.50mm | x | x | x | 1.60mm | x | - | - | 1.80mm | x | - | - | 2.00mm | x | x | - | 2.20mm | - | - | - | 2.50mm | x | x | - | 3.00mm | x | x | - | "x" - available | | "-" - out of stock |
AUGE | steel | Galvanized steel | Stainless steel | aluminum | Electrical steel | | (Ga.) | | in (mm) | in (mm) | in (mm) | in (mm) | in (mm) | 3 | 0.2391 (6.07) | - | - | - | - | 4 | 0.2242 (5.69) | - | - | - | - | 6 | 0.1943 (4.94) | - | - | 0.162 (4.1) | - | 7 | 0.1793 (4.55) | - | 0.1875 (4.76) | 0.1443 (3.67) | - | 8 | 0.1644 (4.18) | 0.1681 (4.27) | 0.1719 (4.37) | 0.1285 (3.26) | - | 9 | 0.1495 (3.80) | 0.1532 (3.89) | 0.1563 (3.97) | 0.1144 (2.91) | - | 10 | 0.1345 (3.42) | 0.1382 (3.51) | 0.1406 (3.57) | 0.1019 (2.59) | - | 11 | 0.1196 (3.04) | 0.1233 (3.13) | 0.1250 (3.18) | 0.0907 (2.30) | - | 12 | 0.1046 (2.66) | 0.1084 (2.75) | 0.1094 (2.78) | 0.0808 (2.05) | - | 13 | 0.0897 (2.28) | 0.0934 (2.37) | 0.094 (2.4) | 0.072 (1.8) | - | 14 | 0.0747 (1.90) | 0.0785 (1.99) | 0.0781 (1.98) | 0.0641 (1.63) | - | 15 | 0.0673 (1.71) | 0.0710 (1.80) | 0.07 (1.8) | 0.057 (1.4) | - | 16 | 0.0598 (1.52) | 0.0635 (1.61) | 0.0625 (1.59) | 0.0508 (1.29) | - | 17 | 0.0538 (1.37) | 0.0575 (1.46) | 0.056 (1.4) | 0.045 (1.1) | - | 18 | 0.0478 (1.21) | 0.0516 (1.31) | 0.0500 (1.27) | 0.0403 (1.02) | - | 19 | 0.0418 (1.06) | 0.0456 (1.16) | 0.044 (1.1) | 0.036 (0.91) | - | 20 | 0.0359 (0.91) | 0.0396 (1.01) | 0.0375 (0.95) | 0.0320 (0.81) | - | 21 | 0.0329 (0.84) | 0.0366 (0.93) | 0.034 (0.86) | 0.028 (0.71) | - | 22 | 0.0299 (0.76) | 0.0336 (0.85) | 0.031 (0.79) | 0.025 (0.64) | 0.0310 (0.787) | 23 | 0.0269 (0.68) | 0.0306 (0.78) | 0.028 (0.71) | 0.023 (0.58) | 0.0280 (0.711) | 24 | 0.0239 (0.61) | 0.0276 (0.70) | 0.025 (0.64) | 0.02 (0.51) | 0.0250 (0.64) | 25 | 0.0209 (0.53) | 0.0247 (0.63) | 0.022 (0.56) | 0.018 (0.46) | 0.0197 (0.50) | 26 | 0.0179 (0.45) | 0.0217 (0.55) | 0.019 (0.48) | 0.017 (0.43) | 0.0185 (0.47) | 27 | 0.0164 (0.42) | 0.0202 (0.51) | 0.017 (0.43) | 0.014 (0.36) | - | 28 | 0.0149 (0.38) | 0.0187 (0.47) | 0.016 (0.41) | 0.0126 (0.32) | - | 29 | 0.0135 (0.34) | 0.0172 (0.44) | 0.014 (0.36) | 0.0113 (0.29) | 0.0140 (0.35) | 30 | 0.0120 (0.30) | 0.0157 (0.40) | 0.013 (0.33) | 0.0100 (0.25) | 0.011 (0.27) | 31 | 0.0105 (0.27) | 0.0142 (0.36) | 0.011 (0.28) | 0.0089 (0.23) | 0.0100 (0.25) | 32 | 0.0097 (0.25) | - | - | - | - | 33 | 0.0090 (0.23) | - | - | - | 0.009 (0.23) | 34 | 0.0082 (0.21) | - | - | - | - | 35 | 0.0075 (0.19) | - | - | - | - | 36 | 0.0067 (0.17) | - | - | - | 0.007 (0.18) | 37 | 0.0064 (0.16) | - | - | - | - | 38 | 0.0060 (0.15) | - | - | - | 0.005 (0.127) |
|